EPDMCASE SHOW

【EPDM】DN250单球耐高温橡胶接头“直连供暖”

服务内容：【EPDM】DN250单球耐高温橡胶接头“直连供暖”

概况：【EPDM】DN250耐高温橡胶接头“直连供暖” DN250 single ball heat-resistant rubber joint "directly connected to heating". 4008com云顶集团官方网站为您先容：【EPDM】DN250耐高温橡胶接头“直......

【EPDM】DN250耐高温橡胶接头“直连供暖”
DN250 single ball heat-resistant rubber joint "directly connected to heating".

4008com云顶集团官方网站为您先容：【EPDM】DN250耐高温橡胶接头“直连供暖”信息，淞江集团为众多热力供暖工程提供耐高温橡胶接头产品，耐高温120度以下，采用三井4045三元乙丙橡胶接头，含量达到50%左右，具有良好的减震和降噪效果。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. introduces: [EPDM] DN250 single ball high temperature resistant rubber joint "direct connection heating" information. Meijiang Group provides high temperature resistant rubber joint products for many thermal heating projects. It can withstand high temperature below 120 degrees and adopts Sanjing 4045 EPDM joint, the content of which is about 50%. It has good shock absorption and noise reduction effect.

一、DN250直连供暖耐高温橡胶接头实物拍照：

二、直连供暖耐高温橡胶接头先容：

名称：耐高温橡胶接头

型号：KXT-EPDM

口径：DN250

压力：1.6Mpa

长度：230mm

轴向压缩：25mm

轴向拉伸：14mm

横向位移：15mm

偏向角度：15°

橡胶材质：三元乙丙橡胶（三井4045）

法兰材质：碳钢 / 球墨QT450 / 不锈钢

法兰标准：GB/T 9119-2000 （除此法兰标准之外，我厂还可以配套更多法兰标准，如需了解其他法兰标准请点击：橡胶接头法兰标准）

适用介质：弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、高温120度以下；（注明：强酸碱、稀硫酸不能用，要选择四氟橡胶接头才可以使用。）

使用优点：减震、降噪、保护液压设备的长期使用，降低维修成本。

质保期限：12个月

生产厂家：4008com云顶集团

了解该产品更多型号参数表请点击：【样册P33】KXT型可曲挠橡胶接头

资质证书：合格证、质保书、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。

Name: high temperature resistant rubber joint

Model: KXT-EPDM

Caliber: DN250

Pressure: 1.6Mpa

Length: 230mm

Axial compression: 25mm

Axial tension: 14mm

Lateral displacement: 15mm

Deviation angle: 15 degrees.

Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)

Flange material: carbon steel / ductile QT450 / stainless steel.

Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)

Applicable medium: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose Teflon rubber joint can be used.)

Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.

Warranty period: 12 months.

Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.

Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三、直连供暖耐高温橡胶接头工厂先容：

相关链接：【天水市麦积区桥南集中供热项目】橡胶接头合同

原创文章如转载，请注明本文链接: /1801.html 浏览：6,489

上一篇: 【EPDM】海水淡化耐酸碱橡胶接头“加强型”

下一篇: 【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”